Filter
Top Products
(MENU)
(START/SET)
Dial keypad
1
Press (MENU).
2
Press K, then @B.
3
Press (START/SET).
4
Enter your logo up to 30 characters.
(The preset logo will be cleared.)
¡Refer to the instructions on page 15.
5
Press (START/SET).
6
Press (MENU).
LOGO=
YOUR LOGO
SYSTEM SET UP
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
14
Setting the date, time, logo and facsimile
telephone number
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number.
This information will be printed on the top of each page transmitted from your unit.
Setting the date and time
(MENU)
(START/SET)
(STOP)
Dial keypad
1
Press (MENU).
2
Press K, then @A.
3
Press (START/SET).
4
Enter the correct month/day/year/hour/minute by
selecting each 2 digits.
Then press j for AM or k for PM.
Example: Aug. 10 1996, 3:00PM
Press `h a` iF `c ``, then
press k for PM.
5
Press (START/SET).
6
Press (MENU).
SET DATE & TIME
SYSTEM SET UP
Note:
¡When you make a mistake while
programming, press (STOP) then make
corrections.
¡The accuracy of the clock will be
approximately t60 seconds a month.