Filter
Top Products
82
»»
Interface pin
The signals are assigned to the interface pins of the KX-F1150 as follows.
Used for transmitted data.
Used for received data.
Signal for data transmission request from
your PC (DTE) to the modem (DCE).
Also used for flow control.
Signal for the modem to permit data
transmission from your PC (DTE) to the
modem (DCE). Also used for flow control.
Signal which shows the status when the
modem is available for transmission and
reception.
Signal ground.
Carrier detect signal.
Signal which shows the status when your
PC is available for communication.
Sends the signal according to the request
signal.
Frame ground.
Transmitted data
Received data
Request to send
Clear to send
Data set ready
Signal GND
Carrier detect
Data terminal ready
Ring indicator
GND
TD
RD
RTS
CTS
DSR
SG
CD
DTR
RI
FG
2
3
4
5
6
7
8
20
22
1
DTE→DCE
DTE←DCE
DTE→DCE
DTE←DCE
DTE←DCE
DTE↔DCE
DTE←DCE
DTE→DCE
DTE←DCE
DTE↔DCE
Item
Signal
Name
Pin No.
D-SUB
25 pin
Signal
Direction
Function
12345678910111213
2314 15 16 17 18 19 2 0 2 1 2 2 2 4 2 5