Filter
Top Products
54
Signaling your pager that a voice message
has been recorded
This feature allows your unit to call your pager automatically each time an incoming voice message is
recorded. You can set the pager number for each memory (common, mailbox 1, 2 and 3).
This feature is only effective with an automatic pager.
1
Press (MENU).
2
For common pager alert, press K, then F@.
For mailbox 1 pager alert, press K, then
FA.
For mailbox 2 pager alert, press K, then
FB.
For mailbox 3 pager alert, press K, then
FC.
3
Press (START/SET).
4
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/SET).
6
Enter your pager phone number.
If necessary, press (REDIAL/PAUSE) twice.
Contact your pager company regarding the
proper pause time.
If your pager has the ability to display phone
numbers, enter the number that you want to
appear in the display.
Press k if required by your pager company.
7
Press (START/SET).
8
Press (MENU).
¡When the pager beeps, retrieve the message using
the remote operation (p. 55).
NO.=
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
MAIL BOX3 PAGER
MAIL BOX2 PAGER
MAIL BOX1 PAGER
COMMON PAGER
SYSTEM SET UP
(MENU)
(START/SET)
Dial keypad
(‹)/(›)
(REDIAL/PAUSE)
Note:
¡You may enter a total of 30 digits and/or
pauses in step 6.
¡This feature can be turned on/off remotely
from a touch tone phone (p. 59).