Filter
Top Products
74
1
Disconnect the power cord and the telephone
line cord.
2
Slide the front lid open lever towards the front
to open the front lid.
3
Clean the feeder rollers and sub roller with a
cloth moistened with isopropyl rubbing
alcohol, and let them dry thoroughly.
4
Clean the rubber flap with a cotton swab
moistened with isopropyl rubbing alcohol, and
let it dry thoroughly.
5
Clean the white plate and the glass with a dry
soft cloth.
6
Close the lid securely by pushing down on
both sides.
7
Connect the power cord and telephone line
cord.
If dirty patterns or black bands appear on a copied, received or printed document, clean the thermal head.
1
Disconnect the power cord and the telephone
line cord.
2
Open the top cover.
3
Press the green button on the right marked
“PUSH” and lift up the head unit.
4
Clean the thermal head with a cloth
moistened with isopropyl rubbing alcohol, and
let dry thoroughly.
5
Press the head unit down firmly until it clicks
into place.
6
Close the top cover securely by pushing
down on both sides.
7
Connect the power cord and telephone line
cord.
Caution:
¡To prevent a malfunction due to static electricity,
do not use a dry cloth and do not touch the
thermal head directly with your finger.
Cleaning the inside of the unit
Cleaning the document feeder unit
If misfeeding occurs frequently or dirty patterns or black bands appear on a copied or transmitted document,
clean the feeder rollers, sub roller, rubber flap, white plate and glass.
Rubber flap
Sub roller Feeder rollers
Front lid open leverGlassWhite plate
Thermal head
Do not push the
black cover.
Cleaning the thermal head
Caution