Filter
Top Products
41
Advanced
Operations
Junk mail prohibitor
(preventing the reception of unwanted fax documents)
This feature prevents reception from facsimile machines whose phone numbers are not stored in automatic
dialing.
Important:
¡This feature does not work when:
—the receive mode of the unit is set to the TEL mode,
—manual reception is performed, or
—the other party does not program their facsimile/telephone number correctly.
¡To receive documents from unauthorized machines, inform your junk mail prohibitor ID to callers, and ask
them to transmit documents manually.
¡The junk mail prohibitor ID must be different from the first 2 digits of the remote operation ID (p. 56) and the
mailbox password (p. 50). E.g. if the remote operation ID is “321”, do not use “32” as a junk mail prohibitor
ID.
Setting the junk mail prohibitor
(MENU)
(START/SET)
Dial keypad
(‹)/(›)
Transmitting documents to your unit with the prohibitor ID
Even if the junk mail prohibitor feature is activated, a designated caller will be able to transmit documents.
Give your junk mail prohibitor ID to all of your designated callers, and advise them of the following steps.
This operation is available only in the ANS/FAX mode.
1. Call your unit from a touch tone telephone.
2. Enter the prohibitor ID while the greeting message is playing.
3. Listen for the fax tone, and start transmission.
1
Press (MENU).
2
Press K, then BD.
3
Press (START/SET).
4
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/SET).
6
To change the junk mail prohibitor ID, enter the
desired 2-digit number.
¡0, # and * cannot be used.
7
Press (START/SET).
8
Press (MENU).
ID=22
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
JUNK MAIL PROH.
SYSTEM SET UP