Filter
Top Products
Section 1: Introduction
013-100149-02 Rev. 1 (01/07) Christie DS+60/DW30/Matrix 3000 User’s Manual 1-3
The light generated by the lamp(s) is then sequentially filtered into the RGB color
primaries by the spinning color wheel(s) and presented to the single chip DMD,
located in the light engine, in sequence. The reflected light from the DMD chip then
passes through the projection lens to the screen.
Figure 1.1 How the Projector Works
Ensure you have received all the following components before using your projector.
• Wireless IR Remote (with batteries)
• Wired Remote Cable (10 ft.)
• Line Cord (North American and European)
• Computer Cable (Dsub 15 to DVI-I)
• DVI-I Cable
• S-Video Cable
• User’s Manual
NOTE: For a complete list of optional components that can be used with your
projector, refer to Section 6 – Specifications. Call Christie or your dealer, if
required.
How the
p
ro
j
ector works f
1.2 Components