Filter
Top Products
Section 3: Operation
3-44 Christie DS+60/DW30/Matrix 3000 User’s Manual 013-100149-02 Rev. 1 (01/07)
four “User” color gamuts needed for your environment and applications. Apply at any
time in the Advanced Image Settings menu.
Figure 3.21. CIE 1931 Chromaticity Diagram
NOTE: Keep new x,y coordinates within the original color gamut triangle shown
here.
PROCEDURE FOR X,Y ADJUSTMENTS: See 3.10, Using Multiple Projectors.
COLOR SATURATION: Use this
submenu if you do not have
specific color coordinates in mind
and will simply judge color
performance by eye or meter. Like
the Color Adjustment by X,Y
submenu, each color control
actually defines new x/y
coordinates for that color and
changes its hue—it is just a
different interface.
Adjust the hue of each primary
color (red, green, blue, and white)
by using more or less of it in
relation to the other colors.
NOTE: A Color Saturation adjustment defines the corresponding x/y coordinates
shown in the Color Adjustment by X,Y submenu. These x/y coordinates will remain
stable for this User gamut until they are changed again via either menu. Values
displayed in the Color Saturation menu, however, will likely fluctuate as you use the
projector, and will be different when you return to this menu at some point in the
future. These floating changes do not affect the x/y coordinates or gamut.
Figure 3.22. Customize Color