Filter
Top Products
User’s Manual 7-4
Troubleshooting
Overheating power down
If the processor's temperature reaches an unacceptably high level with
either setting, the device will automatically shuts down to prevent any
damage - in this instance all unsaved data in memory will be lost.
AC power
If you have trouble turning on the device with the AC adaptor connected
you should check the status of the DC IN indicator.
Problem Procedure
The device shuts down
and DC IN indicator
blinks amber
Leave the device off until the DC IN indicator
stops blinking.
It is recommended to leave the device off until the interior reaches room
temperature even though the DC IN indicator stops blinking.
If the device has reached room temperature and
it still does not start, or if it starts but shuts down
quickly, contact your reseller, dealer or service
provider.
The device shuts down
and its DC IN indicator
is flashing white
This indicates a problem with the heat dispersal
system - you should contact your reseller, dealer
or service provider.
Problem Procedure
AC adaptor doesn’t
power the device (DC
IN indicator does not
glow white)
Check the connections to make sure that the
power cord/adaptor is firmly connected to the
device and a working power outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged it should be
replaced, while if the terminals are soiled, they
should be cleaned with a clean cotton cloth.
If the AC adaptor still does not power the device,
you should contact your reseller, dealer or
service provider.