User’s Manual 3-18
Hardware, Utilities and Options
1. In Windows
7, open the Safely Remove Hardware and Eject Media
icon on the system tray and disable the inserted memory card.
2. Gently press the memory card inside the socket to eject it.
3. Grasp the card and remove it.
Figure 3-3 Removing the inserted memory card
Additional battery pack (6 cell)
You can increase the portability of the computer with additional battery
packs. If you’re away from an AC power source, you can replace a low
battery with a fully charged one. See Chapter 6, Power and Power-up
Modes.
Additional AC adapter
If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adapter for each location will
reduce the weight and bulk of your carrying load.
1.THE MEMORY CARD*
*T
HE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.
■ Make sure the Bridge media slot indicator is out before you remove
the memory media or turn off the computer’s power. If you remove the
memory media or turn off the power while the computer is accessing
the memory media, you may lose data or damage the media.
■ Do not remove the memory media while the computer is in sleep or
hibernation mode. The computer could become unstable or data in the
memory media could be lost.
■ Do not remove only the miniSD/microSD Card while leaving the
adapter in the Bridge Media slot.