Filter
Top Products
User’s Manual 4-16
Operating Basics
Loading discs
Slot-loading optical disc drive
For computer with slot-loading optical disc drive, to load CD/DVD, please
follow the steps below and refer to figures.
1. Turn your computer on.
2. Gently hold the CD/DVD by the edges with label side facing up, and
insert it into the optical disc drive slot straight on slowly.
Figure 4-5 Inserting a CD/DVD
To load CD/DVD, follow the steps below and refer to figures.
1. a. When the power is on, press the eject button to open the drawer
slightly.
Removing discs
Slot-loading optical disc drive
For computer with slot-loading optical disc drive, please follow the steps
below and refer to figures.
1. Make sure that your computer is on.
2. Press the Eject button. The CD/DVD will be ejected about halfway.
Gently push the CD/DVD until it is loaded automatically. Do not push it
forcibly or at an angle to the optical disc drive slot. This may cause
damage or adhesion of foreign matter on the surface of the CD/DVD.
These imperfections may prevent the drive from reading from or writing to
it.
Do not place your hand or another object near the optical disc drive slot.