Filter
Top Products
40
13.2.2 Fault Display
The Fault Display screen indicates the fault records until they are reset.
Table 11 - Fault Display Screen
LCD Screen Description
Indication of no fault
This screen is displayed if there is no fault recorded,
or after the reset button is pressed.
Indication if faults recorded
A fault record is shown with time stamp if
recorded.
An arrow shows up with another record that can
be scrolled by pressing the up/down buttons.
* The fault records will remain in the memory until the reset button is pressed for at least 5
seconds, even after the actual cause of the fault has been resolved. Note that the fault
records are not deleted when the UPS is turned off.
13.2.3 Warning Display
The Warning Display screen indicates the warning records until they are reset.
Table 12 - Warning Display Screen.
LCD Screen Description
Indication of no warning
This screen is displayed if there is no warning
recorded, or after the reset button is pressed.
Indication if warnings recorded
A warning record is shown with time stamp if
recorded.
An arrow shows up with another record that can
be scrolled by pressing the up/down buttons.
FAULTS & WARNINGS
NO FAULT
NO WARNING
FAULTS & WARNINGS
1 FUSE BLOWN
09-09-02 08:05:30
ANOTHER ITEM
FAULTS & WARNINGS
1 UPS OVER LOAD
09-09-02 08:05:30
ANOTHER ITEM
FAULTS & WARNINGS
NO ALARM
NO WARNING