Filter
Top Products
42
14.Operation
This section describes the basic procedures to operate the UPS.
Operators should be qualified/trained personnel.
Operation of the UPS by unqualified or untrained personnel
may result in electric shock, personal injury or fault.
Make sure you understand the meaning of the warning labels
on the equipment, and follow the precautions indicated.
CAUTION
Operating the equipment without understanding of these
labels may result in electric shock or burns.
Operate the UPS in the specified condition.
Operating the UPS in other conditions may result in fault.
During operation, do not turn off the air conditioner for the UPS
room and the battery room.
This will cause the temperature to rise and will result in UPS or
battery fault.
NOTES
When you start or stop the UPS, follow the instruction on the
LCD and perform the proper procedures.
14.1 Operation Types
The operation summary is shown below.
No. Operation Description Page No.
1 Startup Starting up and operating the UPS. 43
2 Switch Power Supply
Switching power supply source between UPS and
Bypass.
45
3 Stop Stop the inverter and chopper/charger. 46
4 Complete Shutdown
Turn off the control power supply.
Shutting down the UPS completely.
47
5
Float / Equalize
Charge
Changing the battery recharge mode between
float charge and equalize charge.
48
6 Protection Charge
Automatic recharge mode transition from
protection charge to float charge.
50