Filter
Top Products
49
(2) Table 18 shows the manual procedure to change from equalize charge to float charge.
After recharging mode is changed to equalize, the mode will automatically be changed back
to float charge after a programmed duration has elapsed. So, manual mode change is not
usually required.
Table 18 - Changing From Equalize Charge to Float Charge.
Step Procedure LCD/LED Status
1 Make sure EQUAL
CHARGE LED is On.
2 Press FLOAT/EQUAL
button for 0.5 sec.
→Change completed.
FLOAT CHARGE LED is On; EQUAL CHARGE LED is Off.
UPS SUPPLY
UPS SUPPLY
AC-VO 480[V]
AC- I O 50[%]
AC-VO 480[V]
AC- I O 50[%]
BATTERIES
AC
SWITCH
UPS
BYPASS
DISCHARGE
FLOAT CHARGE
EQUAL CHARGE
AC INPUT
~
CONVERTER
~
INVERTER
AC OUTPUT
BYPASS INPUT
BATTERIES
AC
SWITCH
UPS
BYPASS
DISCHARGE
FLOAT CHARGE
EQUAL CHARGE
AC INPUT
~
CONVERTER
~
INVERTER
AC OUTPUT
BYPASS INPUT