Filter
Top Products
User’s Manual 8-21
Optional Devices
Tablet PC Pen
Use it as a spare to your computer. Spare pen tip and draw-out tool are
included. Refer to Chapter 6, Power and Power-Up Modes, for the detailed
usage.
Reserve Pen
Use the Reserve Pen in place of the Tablet PC Pen if the Tablet PC Pen is
lost or broken. Refer to Chapter 6, Power and Power-Up Modes, for the
detailed usage.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports XGA and SXGA+ video modes.
To connect a monitor, follow the steps below.
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
Figure 8-24 Connecting the monitor cable to the external monitor port
3. Turn the monitor’s power on.
4. Turn the computer’s power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
However, the Windows Desktop appears on a display device that you used
last time to shut down your computer, if the display device exists when you
turn on the power.
To change the display settings, press Fn + F5. If you disconnect the
external monitor before you turn the computer’s power off, be sure to press
Fn + F5 to switch to the internal display. Refer to Chapter 5, The Keyboard,
for details on using hot keys to change the display setting.
External monitor
port
Monitor cable