Filter
Top Products
4 Replacement Procedures
4.4 HDD module
CAUTION: When handling the HDD, do not press the top surface as shown by the
arrow. Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-4 to 4-10.
1. Turn the computer upside down.
2. Loosen the screw (with an e-ring) and remove the HDD cover, underneath which
there also installing the memory module.
Figure 4-3 Removing the HDD cover
3. Remove the following screws securing HDD module.
M23L FLAT HEAD screw 4
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL] 4-17