Filter
Top Products
4 Replacement Procedures
4.8 Top cover
Removing the Top cover
To remove the Top cover, follow the steps below and refer to Figures 4-15 to 4-17.
1. Remove the following screws securing the bottom case to the toip case.
M2.55L FLAT HEAD screw 6
M24L FLAT HEAD screw 6
M23L FLAT HEAD screw 3
M27L FLAT HEAD screw 3
M2X3L
M2X4
M2.5X5
M2.5X5
M2X7
M2X4
Figure 4-15
Removing the screws on bottom case
2. Turn the bottom case face up and remove the following screws securing top cover.
M24L FLAT HEAD screw 5
3. Disconnect the connector on the main board
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL] 4-29