Filter
Top Products
3 Tests and Diagnostics
Tests and Diagnostics
This chapter explains how to use the Diagnostic Test programs to test the functions of the
computer’s hardware modules. The test program should be stored on an optical media disk or
a USB boot memory.
The test program menu will also consist of some programs which test the hardware function
or display the current information of the computer.
To execute the auto run will automatically run all the test programs.
NOTE: Before starting the diagnostics, be sure to follow these steps:
1. Check all cables are connected firmly.
2. Exit any application and close Windows.
3. Check if [All Devices] is selected in the “Device Configure” in SETUP
menu.
4. Set test PC SATA Controller Mode to “Compatibility” in BIOS.
4. After test, remember to set SATA Controller mode back to “AHCI”.
Satellite M500/M505/M507/M500D/M505D/M507D Maintenance Manual [CONFIDENTIAL] 3-3