Filter
Top Products
4 Replacement Procedures
4. Pull the tab of the HDD assembly to remove it from the connector of the HDD
cable. Be careful not to damage the connector.
Figure 4-4 Removing 4 screws securing HDD assembly
NOTE: The following steps describe how to disassemble the HDD assembly,
however, do not disassemble if the HDD is working properly.
5. Place the HDD assembly on a flat surface, remove the HDD connector and then
remove the following screws.
M34L FLAT HEAD screw 4
Figure 4-5 Removing the HDD connector
4-18 [CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual