Filter
Top Products
4 Replacement Procedures
4-38 [CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
Installing the LED board
To install the LED board, follow the steps below and refer to Figures 4-21 to 4-23.
1. Securing the board.
2. Install the LED board and the Fingerprint Board on the top cover.
3. Secure the following screws on the Top cover.
M23.5L FLAT HEAD screw 4
4. Install the bracket then securing the following screws.
M23.5L FLAT HEAD screw 4
M23L FLAT HEAD screw 2
5. Connect the cable to the board.