Filter
Top Products
4 Replacement Procedures
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL] 4-63
Installing the LCD unit / Camera
To install the LCD unit / Camera, follow the steps below and refer to Figures 4-45 to
4-50.
1. Connect the CCD cable to the Camera.
2. Install the camera to the top case.
3. Connect the LCD cable to the LCD unit
4. Secure one piece of glass tape on LCD cable connector.
5. Seat two LCD supports on the LCD and secure them with the following screws.
M22.5L FLAT HEAD screw 6
CAUTION: When installing the LCD support, do not mistake the left for the right
and vice versa. “L” for the left, “R” for the right and “UP” for the up of
the bracket are marked on the bracket.
6. Seat the LCD unit on the display cover.
CAUTION:
Please be careful to not leave dust and fingerprint on LCD cover glass
when LCD unit is disassembled and assembled. Please refer to video file how to avoid
dust and fingerprint on LCD cover glass when LCD unit is disassembled and
assembled.
7. Secure the following screws to attach the LCD unit.
M2.55L FLAT HEAD screw 6
8. Secure the LCD panel with the following screws.
M2.55L FLAT HEAD screw 2
9. Replace the two pieces of tape to the hole of screw.