Filter
Top Products
4 Replacement Procedures
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL] 4-43
Installing the main PCB
To install the main PCB, follow the steps below and refer to Figures 4-25 to 4-30.
1. Securing the bracket to the ODD.
M22.5L FLAT HEAD screw 2
2. Place the Main PCB to the bottom case
3. Install the ODD to the Main PCB
4. Secure the main PCB to the bottom case using the following screws.
M2X3 FLAT HEAD screw 4
M2X3 FLAT HEAD screw 6
M1.6 X2.5 FLAT HEAD screw 1
5. Connector the cable to the main PCB.
6. Securing the LVDS cable.
M2X2.5 FLAT HEAD screw 1
7. Paste 7 pieces of tape.