Filter
Top Products
4 Replacement Procedures
Install the FAN.
To install the FAN, follow the steps below and refer to Figures 4-43 to 4-44.
1. Apply new thermal pad on the fan as shown in the following figure. Stick the
thermal pad on fan follow the mark. (Be sure to clean off all old pad before
applying new thermal pad).
H000013110
Figure 4-44 Apply new thermal pad on the fan
2. Install the Fan to the main board.
3. Secure the Fan with the following screws.
M24L FLAT HEAD screw 3
4. Connect the cable.
4-58 [CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual