Filter
Top Products
2 Troubleshooting Procedures 2.16 SD Card Slot Troubleshooting
2.13 Card Reader Slot Troubleshooting
This section describes how to determine if the computer’s card reader functions are
functioning properly. Perform the steps below starting with Procedure 1 and continuing with
the other procedures as required.
Procedure 1: Check on Windows VISTA(TM)
Procedure 2: Connector Check and Replacement Check
Procedure 1 Check on Windows VISTA(TM)
Insert an MMC/SD/MS/MS(PRO) card into the slot. Check if the installed Windows
recognizes automatically the MMC/SD/MS/MS(PRO) card and the data in the
MMC/SD/MS/MS(PRO) card can be read.
If the card is not recognized or data are not read, go to Procedure 2.
Procedure 2 Connector Check and Replacement Check
The MMC/SD/MS/MS(PRO) card is connected to CON5001 on the Main board.
Check 1 The MMC/SD/MS/MS(PRO) card and the Main board may be disconnected.
Make sure the MMC/SD/MS/MS(PRO) card is firmly inserted to CON3301 on
the Main board. If not, insert it firmly. If the MMC/SD/MS/MS(PRO) card is still
not functioning properly, perform Check 2.
Check 2 The MMC/SD/MS/MS(PRO) card may be faulty. Replace it with a new one
following the step in Chapter 4 Replacement Procedures. If the problem continues,
perform Check 3.
Check 3 The Main board may be faulty. Replace it with a new one following the step in
Chapter 4 Replacement Procedures.
2-44 [CONFIDENTIAL] Satellite M500/M505/M507 Maintenance Manual