Filter
Top Products
9
255.255.255.0 into the Subnet mask filed.
3) Click OK to keep your settings.
Figure 3-4
5. Verify the network connection between your PC and the AP via the Ping command. The
following example is in Windows XP Operating System.
1) Click Start > Run tab. Enter cmd in the filed and click OK.
2) Type ping 192.168.1.254 on the screen that displays and then press Enter.
If the result displayed is similar to that shown in Figure 3-5 below, the connection between
your PC an
d the AP has been successfully established.
Figure 3-5
If the result displayed is similar to that shown in Figure 3-6 below, it means that your PC has
not connected to the AP.