Filter
Top Products
53
Figure 4-45 Add or Modify a Static Route Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled.
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries.
4.12 IP & MAC Binding
ARP Binding is useful for controlling access of specific computers in the LAN. This page displays
the IP & MAC Binding Setting table; you can operate it in accord with your desire.
There are two submenus under the IP & MAC Binding menu (shown in Figure 4-46): Binding
Setting and ARP List. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
Figure 4-46 the IP & MAC Binding menu
4.12.1 Binding Setting
Selecting IP & MAC Binding > Binding Setting will allow you to configure the binding entries, as
shown in Figure 4-47.