Filter
Top Products
1
5
9
3
7
11
2
6
10
4
8
12
13
14
1
1
When any event occurs, you will see the sign “!” flashes. You can press “ ” to see the details. For example:
Press “ ” again to go to the next message. If there is no further message, the screen will return to the default screen.
31
10 – Display and Configuration (continued)
10-3 Default Display
• After the UPS system starts up and completes the self-test, the
LCD status screen will show the default display. The default
display includes a status message and diagram that shows the
operational status of the UPS system.
1
1
10-3-1 Status Display
• The UPS system output is off and the connected equipment loads
are not powered. This condition may be due to automatic UPS
shutdown or manually switching off the output circuit breaker
switch.
Possible causes:
• The UPS automatically shuts down by itself.
• Manually switch off the output circuit breaker.
12-212-93-3141.indb 31 12/28/2012 11:18:00 AM