Filter
Top Products
Setting Up the Thin Client 39
for the printer is not found, the identification must be a supported driver name on the
connected hosts for the printer to be automatically created on the hosts.
• Printer Class - Select the printer class from the list.
• Enable the printer device - This must be selected to enable the directly-connected
printer.
Figure 22 Printer Setup - SMBs tab
Use the following guidelines:
• Select SMD - Select the SMB you want from the list.
• \\Host\Printer - Enter the Host\Printer or use the browse button next to the box to
make the selection you want.
• Printer Driver - Enter the printer driver you require.
• Printer Class - Select the printer class from the list.
• Enable the printer device - This must be selected to enable the directly-connected
printer.
• Enable LPD service - Select this to make the thin client an LPD (Line Printer Daemon)
server for LPD printing requests from the network (for more information refer to
"Configuring LPD Services."
Figure 23 Printer Setup - Options tab