Filter
Top Products
8.4 <
Maintenance>
4 Thoroughly shake the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge. Doing so will help ensure maximum
copies per cartridge.
5 Remove the paper protecting the print cartridge by pulling the
packing tape.
6 Hold the print cartridge by the handle and slowly insert the cartridge
into the opening in the printer.
Note
• Refer to the helpful pictures on the cartridge wrapping paper.
Caution
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
• To prevent damage to the print cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the print cartridge.
Use the handle on the cartridge to avoid touching this area.
3250-034
3250-036
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
7 Close the front cover. Make sure that the cover is securely closed.
Printing a configuration page
You can print a configuration page to view current printer settings, or to
help troubleshoot printer problems.
Press and hold the Start/Stop button for about 5 seconds.
A configuration page prints out.
Maintenance parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your machine in top working condition the following
items will need to be replaced at the specified number of pages or when
the life span of each item has expired.
Xerox
highly recommends that an authorized service provider, dealer or the
retailer where you bought printer performs this maintenance activity. The
warranty does not cover the replacement of the maintenance parts after their
lifespan.
Items Yield (Average)
Transfer roller Approx. 50,000 pages
Fuser unit Approx. 50,000 pages
Pick-up roller Approx. 50,000 pages
3250-004