Filter
Top Products
ii
To ensure the continued safe operation of your Xerox equipment, follow
these safety guidelines at all times:
Do These
• Always follow all warnings and instructions that are marked on or
supplied with the equipment.
• Before cleaning this product, unplug the product from the electrical
outlet. Always use materials specifically designated for this product,
the use of other materials may result in poor performance and create a
hazardous situation.
• Do not use aerosol cleaners, they may be explosive and flammable
under certain conditions.
• Always exercise care when moving or relocating equipment. Please
contact your local Xerox Service Department to arrange relocation of
the copier to a location outside of your building.
• Always locate the machine on a solid support surface (not on plush
carpet) that has adequate strength to support the weight of the
machine.
• Always locate the machine in an area that has adequate ventilation
and room for servicing.
• Always unplug this equipment from the electrical outlet before
cleaning.
•
NOTE
: Your Xerox machine is equipped with an energy saving device
to conserve power when the machine is not in use. The machine may
be left on continuously.
•
WARNING
: The metallic surfaces in the fuser area may be hot. Please
use caution when removing paper jams from this area and avoid
touching any metallic surfaces.
Do Not Do These
• Never use a ground adapter plug to connect the equipment to a power
outlet that lacks a ground connection terminal.
• Never attempt any maintenance function that is not specifically
described in this documentation.
• Never obstruct ventilation openings. They are provided to prevent
overheating.
• Never remove covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
• Never locate the machine near a radiator or any other heat source.
• Never push objects of any kind into the ventilation openings.
• Never override or "cheat" any of the electrical or mechanical interlock
devices.
• Never place this equipment where people might step on or trip on the
power cord.
• This equipment should not be placed in a room unless proper
ventilation is provided. Please contact your local Authorized dealer for
further information.
Warning - Electrical Safety Information
1 The power receptacle for the machine must meet the requirements
stated on the data plate on the rear of the machine. If you are not
sure that your electrical supply meets the requirements, please
consult your local power company or an electrician for advice.
2 The socket outlet shall be installed near the equipment and shall be
easily accessible.
3 Use the power cable that is supplied with your machine. Do not use
an extension cord or remove or modify the power cord plug.
4 Plug the power cable directly into a correctly grounded electrical
outlet. If you are not sure whether or not an outlet is correctly
grounded, consult an electrician.
5 Do not use an adapter to connect any Xerox equipment to an
electrical outlet that lacks a ground connection terminal.
6 Do not place this equipment where people might step or trip on the
power cable.
7 Do not place objects on the power cable.
8 Do not override or disable electrical or mechanical interlock devices.
9 Do not push objects into slots or openings on the machine. Electrical
shock or fire may result.
10 Do not obstruct ventilation openings. These openings are used to
provide proper cooling to the Xerox machine.
11
Disconnect Device
: The power cable is the disconnect device for
this equipment. It is attached to the back of the machine as a plug-in
device. To remove all electrical power from the machine, disconnect
the power cable from the electrical outlet.
Electrical Supply
1 This product shall be operated from the type of electrical supply
indicted on the product's data plate label. If you are not sure that
your electrical supply meets the requirements, please consult your
local power company for advice.
2
WARNING
: This equipment must be connected to a protective
earth circuit. This equipment is supplied with a plug that has a
protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace the outlet.
3 Always connect equipment to a correctly grounded power outlet. If
in doubt, have the outlet checked by a qualified electrician.
Disconnect Device
The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To remove all
electrical power from the equipment, disconnect the power cable from the
electrical outlet.