Filter
Top Products
Initial Setup
WorkCentre 6400 Multifunction Printer
System Administrator Guide
19
Enabling Services
Services must be enabled in CentreWare IS on the Service Registration page before they can be
managed through the Tools & Feature Access page. For details on Tools & Feature Access setup, see
Controlling Access to Tools and Features on page 61.
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing
CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Services > Service Registration.
2. Ensure that all listed services are enabled.
3. Click Apply.
Note: If a service is not enabled on the Service Registration page, you may not be able to view or
manage it from the Tools and Features page. Ensure that the desired service is enabled.
Viewing Services on the Control Panel
To ssee which services are enabled:
1. At the printer control panel, press Machine Status, then touch the Machine Information tab.
2. Touch Installed Options.
3. All installed options registered in CentreWare IS and set to Locked or Unlocked on the Tools &
Services page, along with their status display.