Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 103
Main Menu (continued)
COMPONENT TESTS
The COMPONENT TESTS option of the SCANNER DIAGNOSTICS menu
provides a sub-menu of the following menu choices:
• MOTOR SPEED – Enables the Customer Service Engineer to adjust the
Scanner motor speed and correct magnification errors in the process
direction. The diagnostic password is required for this function.
• LEAD EDGE/TRAIL EDGE – Enables you to execute the lead edge/trail
edge diagnostic.
• SENSORS – Enables you to display the current state of the Scanner
optical paper sensors and the thick document sensor.
MOTOR COMMUNICATIONS – Enables a document motor communications
loopback test to assist in diagnosing a scanner problem.
• DOCUMENT MOTOR – Enables you to stop and start the document
handler motor.
• LAMP – Enables you to turn the lamp on and off and receive a feedback
from the illumination sensor.
• CALIBRATION MOTOR – Enables you to test the calibration zone motor.
To access the COMPONENT TESTS menu:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS
menu screen is displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is highlighted.
5. Press the Enter key to highlight SCANNER DIAGNOSTICS. The
SCANNER DIAGNOSTICS menu screen is displayed.
6. Press the Next key until COMPONENT TESTS is highlighted.
7. Press the Enter key to select COMPONENT TESTS. The
COMPONENT TESTS menu screen is displayed. The black arrows
indicate that the menu contains more options than are visible. The
selected option is highlighted.
8. Press the Previous or Next key to scroll through the list of options.
9. When the desired option is highlighted, press the Enter key to select the
option. The screen for the selected option is displayed.
COMPONENT TESTS
MOTOR SPEED
LEAD EDGE/TRAIL EDGE
SENSORS