Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 83
Main Menu (continued)
NOTE: This screen identifies the finisher, if any. If there is no finisher, the
MODEL is displayed as NONE. If a Folder is connected, the FINISHER
screen displays the configuration of the connected Folder.
7. Press the Exit key to return to the SYSTEM DESCRIPTION screen.
Recent Fault List
The RECENT FAULT LIST option of the SYSTEM INFORMATION menu
displays the most recent faults related to the Scanner. Fault messages are
stored in the Controller. Each fault message contains a fault code and a
digital time stamp. When you call for service, the service center may ask you
for this information.
To display the recent fault list:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key to highlight SYSTEM INFORMATION.
3. Press the Enter key to select SYSTEM INFORMATION. The SYSTEM
INFORMATION menu screen is displayed.
4. Press the Next key to highlight RECENT FAULT LIST.
5. Press the Enter key to select RECENT FAULT LIST. The RECENT
FAULT LIST screen is displayed. Below is an example of the RECENT
FAULT LIST screen.
6. Press the Previous or Next key to scroll through the list.
7. Press the Exit key to return to the SYSTEM INFORMATION menu
screen.
PRINTER
MODEL: XES 8830
FIRMWARE: xxxxxxx
FINISHER
MODEL:
RECENT FAULT LIST
37449914 50000008
37449868 50000008