Xerox xerox documate 3115 Scanner User Manual


 
Xerox
®
DocuMate
®
3115
User’s Guide
11
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times:
Do These
Always follow all warnings and instructions that are marked on or supplied with the equipment.
Always use materials specifically designated for this product, the use of other materials may result
in poor performance and create a hazardous situation. Do not use aerosol cleaners, they may be
explosive and flammable under certain conditions.
Always exercise care when moving or relocating equipment.
Always locate the machine on a solid support surface that has adequate strength to support the
weight of the machine.
Always locate the machine in an area that has adequate ventilation and room for servicing.
Always unplug this equipment from the electrical outlet before cleaning.
NOTE: Your Xerox machine is equipped with an energy saving device to conserve power when the
machine is not in use. The machine may be left on continuously.
Do Not Do These
Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground
connection terminal.
Never attempt any maintenance function that is not specifically described in this documentation.
Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
Never locate the machine near a radiator or any other heat source.
Never override or “cheat” any of the electrical or mechanical interlock devices.
Never place this equipment where people might step on or trip on the power cord.
Caution: This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of
view.