Filter
Top Products
1 Getting Started
Congratulations! You have just purchased a high-quality thermal demand printer
manufactured by the industry leader in quality, service, and value–Zebra Technologies
Corporation. For over 25 years, Zebra has provided customers with the highest caliber
of products and support.
This manual provides all of the information you will need to operate your printer on a
daily basis. To create label formats, refer to the ZPL II Programming Guide (part #
46469L–if you did not order one with your printer, it is available free by sending in the
postcard at the front of this manual).
There is also a two-volume maintenance manual for this printer.
Volume 1: General
Maintenance (part # 44868L) contains the information you may need in order to
maintain your printer, and
Volume 2: Circuit Descriptions and Electrical Schematics
(part # 44869L) contains information necessary for repairing the circuit boards at the
component level. You may order both volumes by specifying part # 44452L.
Unpacking
Save the carton and all packing materials in case shipping is ever required.
Inspect the printer for possible damage incurred during shipment.
•
Check all exterior surfaces for damage.
•
Raise the Media Access Door and inspect the Media Compartment for
damage to components.
Reporting Damage
If you discover shipping damage upon inspection:
•
Immediately notify the shipping company of the damage.
•
Retain all packaging material for shipping company inspection.
•
File a damage report with the shipping company and notify your local
distributor and Zebra Technologies Corporation of the damage.
Zebra Technologies Corporation is not responsible for any damage incurred during
shipment of the equipment and will not repair this damage under warranty. Immediate
notification of damage to the shipping company or its insuring agency will generally
result in ensuring any damage claim validity and ultimate monetary compensation.
1
1