Filter
Top Products
33
Operations
Load Media in Tear-Off Mode
10/21/05 S4M User Guide 13290L-001 Rev. A
Load Media in Tear-Off Mode
Tear-Off is the default mode. Figure 17 shows roll and fanfold media loaded in Tear-Off mode.
Figure 17 • Tear-Off Mode
To load media in Tear-Off Mode, complete these steps:
1. Set the printer to Tear-Off mode. See Select the Label Removal Method on page 63 for
instructions.
2. Insert the media in the printer. See Inserting Media into the Printer on page 31 for
instructions.
Roll Media
Fanfold Media
1
Printhead assembly
5
Dancer
2
Transmissive sensor
6
Media guide
3
Media supply guide
7
Printhead release latch
4
Media supply hanger
8
Printed label
1
2
5678
4
3
1
2
5678
4
3