Filter
Top Products
41
Operations
Load Ribbon
10/21/05 S4M User Guide 13290L-001 Rev. A
Load Ribbon
The ribbon supply spindle in your printer is a dual-tension variety. Most applications require
the spindle to be in the normal position. The low tension position is recommended only when a
narrow ribbon is used or if normal tension hampers the ribbon movement.
Figure 19 • Ribbon Path
Note • This section applies only to printers that have the Thermal Transfer option installed.
Note • Always use ribbon that is wider than the media to protect the printhead from wear.
For direct thermal printing, do not load ribbon in the printer.
1
Printhead assembly
2
Ribbon supply spindle
3
Ribbon take-up spindle
4
Tension blades
1
4
3
2