Filter
Top Products
Operations
Load Media in Peel-Off Mode
38
13290L-001 Rev. A S4M User Guide 10/21/05
6. Feed the media under the dancer assembly, through the slot in the transmissive sensor, and
under the ribbon sensor. Push the media to the back of the transmissive sensor.
7. Push down the peel-off mechanism release lever to open the peel assembly.
8. Pull approximately 18 in. (500 mm) of media through the front of the printer.
9. Remove the exposed labels so that only the liner remains.
1
Dancer assembly
2
Transmissive sensor
3
Ribbon sensor
123