Zebra Technologies S4M Printer User Manual


 
About This Document
Who Should Use This Document
2
13290L-001 Rev. A S4M User Guide 10/21/05
Who Should Use This Document
This User Guide is intended for use by any person who needs to operate or troubleshoot
problems with the printer.
How This Document Is Organized
The User Guide is set up as follows:
Section Description
Introduction on page 7 This section shows the operational controls and
location of major components used when loading
media and ribbon. Other features of the printer are
discussed.
Printer Setup on page 15 This section provides the tasks that you must
complete and the issues that you must consider
before you load and configure your printer.
Operations on page 29 This section provides the procedures for loading
and calibrating the printer.
Configuration on page 51 This section discusses printer configuration
settings and instructs you how to view or change
printer parameters through the control panel.
Routine Maintenance on page 77 This section provides routine cleaning and
maintenance procedures.
Troubleshooting on page 85 This section provides information about errors that
you might need to troubleshoot. Assorted
diagnostic tests are included.
Specifications on page 105 This section provides the features of and
specifications for the printer.
ZPL II Commands on page 111 This section provides the ZPL II commands that
were added or changed for the S4M.