Filter
Top Products
93
Troubleshooting
Calibration Problems
10/21/05 S4M User Guide 13290L-001 Rev. A
Calibration Problems
Table 17 identifies problems with calibration, the possible causes, and the recommended
solutions.
Table 17 • Calibration Problems and Solutions
Problem Recommended Solution
Loss of printing registration on
labels.Excessive vertical drift in top-of-form
registration.
Ensure that the media guides are properly positioned.
Set the printer for the correct media type (non-continuous or
continuous). See Set Media Type on page 62 .
Clean the platen roller according to the instructions in Clean
the Printhead and Platen Roller on page 79.
Auto Calibrate failed. Ensure that media and ribbon are loaded correctly.
Ensure that the sensors are clean and properly positioned.