Filter
Top Products
Zebra Z4M/Z6M Printers User’s Guide 3
3ULQWHU3RZHU
The power supply in the printer automatically detects the applied line voltage and
works in the 90 to 265 VAC range.
:$51,1*)RUSHUVRQQHODQGHTXLSPHQWVDIHW\DOZD\VXVHD
WKUHHSURQJSOXJZLWKDQHDUWKJURXQGFRQQHFWLRQ
NOTE: Depending on how your printer was ordered, a power cord may or
may not be included. If one is not included, or if the one included is not
suitable for your requirements, refer to “Power Line Cord Specifications” on
page 85.
1. Make sure that the POWER switch
(see Figure 1) is in the “off” (O)
position before connecting the power
cord.
2. Plug the female end of the power cord
into the connector at the rear of the
printer.
3. Plug the male end of the power cord
into a live AC outlet.
Figure 1
Connector
AC
Power
Switch