Zebra Technologies Z4M Printer User Manual


  Open as PDF
of 112
 
10 Zebra Z4M/Z6M Printers User’s Guide
$GMXVWLQJWKH5HIOHFWLYH6HQVRU
Refer to Figure 7.
1. Open the printhead assembly by pressing the printhead open lever.
2. Locate the reflective sensor positioning lever.
3. Move the reflective sensor positioning lever across the width of the media until the
reflective sensor aligns with the start-of-label indicator. The glow of the red light
assists in the proper placement of the reflective sensor.
4. Close the printhead assembly.
7UDQVPLVVLYH6HQVRU
The transmissive sensor is in a fixed position and enabled via the front panel (refer to
“SENSOR SELECT” on page 41 for details).
Figure 7
Printhead Assembly
Reflective
Sensor
Positioning
Lever
Reflective
Sensor
Printhead Open
Lever
 previous next