Filter
Top Products
88 Zebra Z4M/Z6M Printers User’s Guide
56,QWHUIDFH
This printer is configured as Data Terminal Equipment (DTE). The serial data cable
used to connect the printer to the host computer is one of two styles:
• 9-pin to 25-pin cable – (null modem cable) must have a 9-pin “D” type (DB-9S)
connector on the end that is plugged into the serial port at the computer and a
25-pin “D” type (DB-25P) connector on the other end that is plugged into the
connector at the rear of the printer. Figure 36 shows the required cable
connections.
• 25-pin to 25-pin cable – (null modem cable) must have a 25-pin “D” type
(DB-25S) connector on the end that is plugged into the serial port at the computer
and a 25-pin “D” type (DB-25P) connector on the other end that is plugged into the
connector at the rear of the printer. Figure 37 shows the required cable
connections.
Figure 36
Figure 37
DB-9S
Connector
to P.C.
DB-25P
Connector
to Printer
DB-25S
Connector
to P.C.
DB-25P
Connector
to Printer
CTS
1
2
3
6
7
8
20
1
2
3
4
6
7
20