Filter
Top Products
50 Zebra Z4M/Z6M Printers User’s Guide
Selecting ZPL Mode
Display Shows Action/Explanation
ZPL MODE
Selecting ZPL Mode: Press the INCREMENT (+) or DECREMENT (–) key to
display other choices.
Default: ZPL II
Selections: ZPL II, ZPL
The printer remains in the selected mode until it is changed by this front panel
instruction or by using a ZPL/ZPL II command. The printer accepts label formats
written in either ZPL or ZPL II. This eliminates the need to rewrite any ZPL
formats you already have. Refer to the ZPL II Programming Guide Volume II for
more information on the differences between ZPL and ZPL II.
Power-Up and Head Close Parameters
MEDIA POWER UP
Media Power Up: Press the INCREMENT (+) or DECREMENT (–) key to
display other choices.
Default: Feed
Selections: Feed, calibration, length, and no motion
This parameter establishes the action of the media when the printer is turned on.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.
HEAD CLOSE
Head Close: Press the INCREMENT (+) or DECREMENT (–) key to display
other choices.
Default: Feed
Selections: Feed, calibration, length, no motion
Determines the action of the media after the printhead has been opened and
then closed.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.