Filter
Top Products
60 Zebra Z4M/Z6M Printers User’s Guide
Save-a-Printhead Cleaning Film
What is
Save-a-Printhead cleaning film? A specially coated film that removes
contamination buildup without damaging the printhead.
What are the benefits of
Save-a-Printhead cleaning film?
• Extends the life of your printhead.
• Reduces maintenance downtime and the cost of replacing a printhead.
• An inexpensive, easy and quick way to remove contaminants without having to
remove the printhead.
When should you use
Save-a-Printhead cleaning film? When you see degrading print
quality that looks like faded print or a failed print element(s) that cannot be corrected
by cleaning with the pre-soaked cleaning swabs.
How to Use Save-a-Printhead Cleaning Film
1. Remove power from the printer.
2. Open the printhead, remove media and ribbon from the print mechanism.
3. Clean the printhead per the recommended Preventive Maintenance procedures.
4. Position the Save-a-Printhead film in the print path, placing the glossy side down
away from the printhead (matte side up).
5. Close and latch the printhead.
6. Slowly pull the full length of the film through the print mechanism.
7. Clean the printhead per the recommended Preventive Maintenance procedures a
second time.
8. Reload media and ribbon, close and latch the printhead.
9. Print labels and inspect for improved print quality. If quality has not improved,
contact our Technical Support staff.
* Only one pass is required to remove contamination buildup.
* Each strip of film can be used up to 10 times.
* Discard the strip when residue buildup or other contamination is apparent.