Filter
Top Products
54 Zebra Z4M/Z6M Printers User’s Guide
Display Shows Action/Explanation
LANGUAGE
Selecting the Display Language: Press the INCREMENT (+) or DECREMENT
(–) key to display other choices.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian,
Portuguese, Swedish, Danish, Spanish 2, Dutch, Finnish, Japanese
This parameter allows you to change the language used on the front panel display.
You have now completed the entire configuration and calibration sequence. You may either press
the SELECT key or the SETUP/EXIT key.
DARKNESS
You are now back at the first parameter in the configuration sequence.
NOTE: If you pressed the SELECT key but are through programming the
printer configuration, you may press the SETUP/EXIT key and continue
with the “SAVE SETTINGS” function.
SAVE SETTINGS
Save Settings: Press the INCREMENT (+) or DECREMENT (–) key to display
other choices.
Default: Permanent
Selections: Permanent, temporary, cancel, load defaults, load last save
This display appears when you attempt to exit the configuration mode.
• Permanent: Permanently saves the changes, even when printer power is turned
off.
• Temporary: Saves the changes until you change the values again or until power is
turned off.
• Cancel: Cancels all changes from the time you entered the configuration mode
except for darkness and tear-off position (if they were changed).
• Load defaults: Loads factory defaults.
• Load last save: Loads the values from the last permanent save.
PRINTER READY
Press the SETUP/EXIT key to activate the displayed choice.
You have exited the configuration and calibration sequence and are now ready for
normal printer operation.