EES-1024AF Intelligent Ethernet Switch
4-4 Introducing the SMT
Table 4-3 SMT Main Menu Summary
# MENU TITLE DESCRIPTION
4 Spanning Tree Protocol Use this menu to enable or disable the Spanning Tree Protocol and show the
port status.
5 Broadcast Storm Filter Use this menu to enable or disable the Broadcast Storm filters.
6 IGMP Use this menu to enable or disable the IGMP.
V VLAN Mode (2 modes) Use this menu to set the VLAN modes.
C VLAN for CPU (2 VLANs Use this menu to set VLAN ID for managed CPU.
I Secure IP for Telnet and
HTTP
Use this menu to enable or disable secure IP for Telnet or HTTP and specify the
secure IP address(es).
S Save Current Settings Select this option to save your current custom settings.
D Factory Default Settings
and Reboot System
Select this option to reset the switch to factory default settings and reboot the
system. This will erase all your custom settings.
R Reboot System This option reboots the system and makes all new settings take effect.
Q Quit To exit the SMT menu, you must type ‘q’ or ‘Q’.
The SMT is not case sensitive; therefore you can type either “q” or “Q” at the prompt to exit.
4.4 Device Settings
4.4.1 Changing Your System Password
It is important to change the system password or login name by doing the following:
Step 1. Enter 1 from the main menu. This will bring up Device Setting as shown.
Figure 4-6 SMT - Device Settings
Step 2. Enter 7 to select the Change User/Password option.
Step 3. Type in the new username and enter the new password twice.
[Main] [Device Settings]
0.1 Version (RO): 1.01.1, Mar. 20, 2002
0.2 MAC Address (RO): 00-00-1c-f3-0c-02
0.3 System Up Time (RO): 0 days 0 hours 3 minutes 59
seconds
1. System Name: EES 1024AF
2. System Location: 2
3. System Contact: Someone
4. IP Address: 192.168.1.1
5. Subnet Mask: 255.255.255.0
6. Default Gateway: 192.168.1.10
7. Change User/Password: root/root
8. Console Login Enabled: Yes
Q. Quit
Note: please save settings and reboot system
so that your device settings will take effect
Select one function (1-8, Q): 7