Filter
Top Products
EES-1024AF Intelligent Ethernet Switch
Product Specifications E
Appendix B
Product Specifications
This section provides the specifications of EES-1024AF Intelligent Switch and optional modules.
Diagram 7 General Product Specifications
Standards
• IEEE802.3 10BASE-T Ethernet (twisted-pair
copper)
• IEEE802.3u 100BASE-TX Fast Ethernet
(twisted-pair copper)
• IEEE802.3z Gigabit SX/LX
• ANSI/IEEE802.3 Auto-negotiation
• IEEE802.3x Flow Control
• IEEE802.1p Priority Queues
• IEEE802.1Q VLAN
• IEEE802.1d Spanning Tree
Protocol
CSMA/CD
Interface
• 24 10/100BASE-T Ethernet port
• Two expansion slots. Modules support for
10/100/100BaseT, 100FX, Gigabit SX/LX
• One RS-232C console port
Data Transfer Rate
• Ethernet: 10Mbps(half duplex)
20Mbps (full duplex)
• Fast Ethernet: 100Mbps (half duplex)
200Mbps(full duplex)
• Gigabit Ethernet: 2000Mbps(full duplex) (*)
* Available on optional Gigabit Module
Network Cables
• 10BASE-T: 2-pair UTP Cat.3, 4, 5 (100 m)
EIA/TIA-586 100-ohm STP (100 m)
• 100BASE-TX, 1000BASE-T: UTP Cat.5 (100 m
max.) EIA/TIA-568 100-ohm STP (100 m max.)
• 100BASE-FX: 50/125-micron multi-mode fiber-
optics and 62.5/125-micron multi-mode fiber-
optics. Max distance up to 2km or longer (up to
60km), refer the label on the module
• 1000BASE-SX: 50/125-micron multi-mode
fiber-optics (500 m max.) 62.5/125-micron
multi-mode fiber-optics (220 m max.)
• 1000BASE-LX: 9/125-micron single-mode
fiber-optics (10 km max.)