Filter
Top Products
EES-1024AF Intelligent Ethernet Switch
Configuration and Firmware Maintenance 8-1
This chapter shows you how to save, reboot, reset and upgrade new firmware to the switch using the
Web Configurator.
8.1 Save and Reboot
8.1.1 Save
You can save current settings by selecting Current Settings then clicking Apply next to the checkbox. You should
reboot the system so that your current settings will take effect.
8.1.2 Reboot
If you want to reboot the switch, select Reboot System then click Apply next to the checkbox. Wait for about 30
seconds before you continue to use the Web Configurator.
8.2 Reset to Factory Default Settings
If you want to use the factory default settings, select Factory Default Settings then click Apply next to the
checkbox. You should reboot the system so that the factory default settings will take effect.
Resetting to factory default settings erases your custom configuration.
Chapter 8
Configuration
and Firmware Maintenance