Filter
Top Products
EES-1024AF Intelligent Ethernet Switch
General Setup Using the SMT 5-3
Figure 5-3 SMT - Spanning Tree Protocol with Port Status
5.4 Broadcast Storm Filter
Follow the steps to enable or disable the broadcast storm filter.
Step 1. Enter 5 from the main menu to bring up the Broadcast Storm Filter page.
Step 2. Enter 1 to enable or 2 to diable the filter at the prompt.
Figure 5-4 SMT - Broadcast Storm Filter
5.5 Internet Group Management Protocol (IGMP)
Follow the steps to enable or disable the IGMP
Step 1. Enter 6 from the main menu to open IGMP page.
Step 2. Enter 1 to enable or 2 to disable the IGMP.
[Main] [Spanning Tree Protocol]
Current state: Enabled
1. Enable
2. Disable
3. Show Port State
Q. Quit
Select one function (1-3, Q): 3
============================================================
[Main] [Spanning Tree Protocol] [Show Port State]
Module Port State
------ ---- ------------
0 1 Listening
0 2 Not connected
0 3 Not connected
Press 'ENTER' key to continue...
[Main] [Broadcast Storm Filter]
Current state: Enabled
1. Enable
2. Disable
Q. Quit
Select one function (1-2, Q): 1