Filter
Top Products
EES-1024AF Intelligent Ethernet Switch
7-14 Advanced Web Management
Figure 7-12 Web Configurator - Port Mirroring
7.13 IP Config
You can change the IP address, subnet mask and default gateway of the managed node. You can also modify the
fields from the RS232 console. Enter the IP address, subnet mask and default gateway in the corresponding fields.
Follow the steps below if you want to change the user name or password for the managed node.
Step 1. Select Change Password.
Step 2. Enter the user name in the Username field.
Step 3. Enter the same password in the Password and Confirm Password fields.
Step 4. Click Apply.
Reboot the switch to make your settings take effect if you have changed one of the IP address, subnet mask or
default gateway.